Home
About Us
Company
Technical
Honors
Milestone
Product
Application
Information
News
Video
Download
Contact Us
How to solve the problem of bursting edges when processing plates?
The plate is thicker, each piece of micro-bending is not flat, the gap between the upper and lower stacked together; mechanical pressure cylinder pressure is not enough; workpiece plate surface stripes (bump) will also burst edge; work sawing less pressure 2-3 plates; sawing plate into the knife speed is properly adjusted to slow down the appropriate cut approved; check whether the saw blade is not sharp, timely repair the edge.
2018
07-05
How to determine whether an alloy circular saw blade needs resharpening
In the sawing process, if the saw blade parts sound abnormal, rough cutting sound, or a "click, click" sound, should check the situation of the saw blade, in most cases, is a signal that needs to be repaired. Saw blade in cutting off the workpiece, its quality is basically not too much difference, the surface is relatively smooth, no burr, if you find that suddenly the surface of the workpiece is not very smooth, or the same side of the thorns, iron chips sticky workpiece does not fall off and other phenomena, you can basically judge the saw blade resharpening time to come.
Woodworking circular sawing machine saw blade breakage factors
Circular sawing machine saw blade bounce teeth or loss too fast in many enterprises using metal circular sawing machine often occurs, this is a common problem, but also make the enterprise more headache, after all, the consumption of saw blade is also a considerable amount of business expenses. So is there any way to minimize this loss?
